Borders

In the box model module, we considered a frame analogy to describe each section of the box model.

Three picture frames next to each other.
The middle frame has the sections of the box model over the top of it

The border box is the frame of your boxes, and the border properties give you a huge array of options to create that frame in nearly any style that you can think of.

Border properties

The individual border properties provide a way to style the various parts of a border.

Browser Support

  • Chrome: 1.
  • Edge: 12.
  • Firefox: 1.
  • Safari: 1.

Source

Style

For a border to appear, you have to define the border-style. There's a few options to choose from:

When using the ridge, inset, outset and groove styles, the browser will darken the border color for the second shown color to provide contrast and depth. This behaviour can vary between browsers, especially for dark colors such as black. In Chrome, these border styles will appear to be solid and in Firefox, they will be lightened to then provide a darker second color.

Browser behaviour can vary for other border styles too, so it's important to test your site in different browsers. A common example of this difference is how each browser renders the dotted and dashed styles.

The border demo in Chrome,
  Firefox and Safari which demonstrates the subtle differences
  in how the borders display
Borders displayed in Chrome, Firefox, and Safari.

To set border style on each side of your box, you can use border-top-style, border-right-style, border-left-style, and border-bottom-style.

Shorthand

As with margin and padding, you can use the border shorthand property to define all the parts of your border in one declaration.

.my-element {
    border: 1px solid red;
}

The order of values in the border shorthand are border-width, border-style and then, border-color.

Color

You can set color on all sides of your box or on each individual side with border-color. By default, it uses the box's current text color: currentColor. This means that if you only declare border properties, like width, the color will be that computed value unless you explicitly set it.

.my-element {
    color: blue;
    border: solid; /* Will be a blue border */
}

.my-element {
    color: blue;
    border: solid yellow;
}

To set a border color on each side of your box, use border-top-color, border-right-color, border-left-color and border-bottom-color.

Width

The width of a border is how thick the line is, and is controlled by border-width. The default border width is medium. This won't be visible unless you define a style, though. You can use other named widths such as thin and thick.

The border-width properties also accept a length unit such as px, em, rem or %. To set border width on each side of your box, use border-top-width, border-right-width, border-left-width and border-bottom-width.

Logical properties

In the Logical Properties module you discovered how to refer to block flow and inline flow, rather than explicit top, right, bottom or left sides.

You have this capability with borders, too:

.my-element {
    border: 2px dotted;
    border-inline-end: 2px solid red;
}

In this example, .my-element has all sides defined as having a 2px, dotted border that is the current text color. The inline-end border is then defined as 2px, solid and red. This means that in left-to-right languages—like English— the red border will be on the right side of the box. In right-to-left languages—like Arabic— the red border will be on the left side of the box.

Browser support is varied for logical properties in borders, so make sure you check support before using.

Border radius

To give a box rounded corners use the border-radius property.

.my-element {
    border-radius: 1em;
}

This shorthand adds a consistent border to each corner of your box. As with the other border properties, you can define the border radius for each side with border-top-left-radius, border-top-right-radius, border-bottom-right-radius and border-bottom-left-radius.

You can also specify each corner's radius in the shorthand, which follows the order: top left, top right, bottom right then bottom left.

.my-element {
    border-radius: 1em 2em 3em 4em;
}

By defining a single value for a corner, you are using another shorthand because a border radius is split into two parts: the vertical and horizontal sides. This means that when you set border-top-left-radius: 1em, you are setting the top-left-top radius and the top-left-left radius.

You can define both properties, per corner like this:

.my-element {
    border-top-left-radius: 1em 2em;
}

This adds a border-top-left-top value of 1em, and a border-top-left-left value of 2em. This converts the top left border radius into an elliptical radius, rather than the default circular radius.

You can define these values in the border-radius shorthand, using a / to define the elliptical values, after the standard values. This enables you to get creative and make some complex shapes.

.my-element {
    border: 2px solid;
  border-radius: 95px 155px 148px 103px / 48px 95px 130px 203px;
}

Border images

You don't just have to use a stroke-based border in CSS. You can also use any type of image, using border-image. This shorthand property allows you to set the source image, how that image is sliced, the image width, how far the border is outset from the edge and how it should repeat.

.my-element {
  border-image-source: url(https://assets.codepen.io/174183/border-image-frame.jpg);
  border-image-slice: 61 58 51 48;
  border-image-width: 20px 20px 20px 20px;
  border-image-outset: 0px 0px 0px 0px;
  border-image-repeat: stretch stretch;
}

The border-image-width property is like border-width: it is how you set the width of your border image. The border-image-outset property lets you set the distance between your border image and the box that it wraps around.

border-image-source

The border-image-source (source of the border image) can be a url for any valid image, which includes CSS gradients.

.my-element {
    border-image-source: url('path/to/image.png');
}

.my-element {
    border-image-source: linear-gradient(to bottom, #000, #fff);
}

border-image-slice

The border-image-slice property is a useful property that allows you to slice an image into 9 parts, made up of 4 split lines. It works like the margin shorthand where you define the top, right, bottom and left offset value.

.my-element {
    border-image: url('image.jpg');
    border-image-slice: 61 58 51 48;
}

The image used in the demo with the four slices shown with blue lines

With the offset values defined, you now have 9 sections of the image: 4 corners, 4 edges and a middle section. The corners are applied to the corners of the element with the border image. The edges are applied to the edges of that element. The border-image-repeat property defines how those edges fill their space and the border-image-width property controls the size of the slices.

Lastly, the fill keyword determines whether the middle section, left by the slicing, is used as the element's background image or not.

border-image-repeat

border-image-repeat is how you instruct CSS how you would like your border image to repeat. It works the same as background-repeat.

  • The initial value is stretch, which stretches the source image to fill available space where possible.
  • The repeat value tiles the source image's edges as many times as possible, and may clip the edge regions to achieve this.
  • The round value is the same as repeat, but instead of clipping the image edge regions to fit as many as possible, it stretches the image as well as repeating it to achieve a seamless repeat
  • The space value is again, the same as repeat, but this value adds space between each edge region to create a seamless pattern.

Check your understanding

Test your knowledge of borders

Which is the default border color?

historicColor
black
white
currentColor
.my-element {
  border: solid hotpink;
}

What is the default width of a border?

medium
solid
1px

border-inline: 1px solid would...

put borders on the first line.
put borders on the inside.
put borders on the left and right (in Latin layouts).
put borders on the top and bottom (in Latin layouts).