Improving HTML5 Canvas performance

Boris Smus
Boris Smus


HTML5 canvas, which started as an experiment from Apple, is the most widely supported standard for 2D immediate mode graphics on the web. Many developers now rely on it for a wide variety of multimedia projects, visualizations, and games. However, as the applications we build increase in complexity, developers inadvertently hit the performance wall. There’s a lot of disconnected wisdom about optimizing canvas performance. This article aims to consolidate some of this body into a more readily digestible resource for developers. This article includes fundamental optimizations that apply to all computer graphics environments as well as canvas-specific techniques that are subject to change as canvas implementations improve. In particular, as browser vendors implement canvas GPU acceleration, some of the outlined performance techniques discussed will likely become less impactful. This will be noted where appropriate. Note that this article does not go into usage of HTML5 canvas. For that, check out these canvas related articles on HTML5Rocks, this chapter on the Dive into HTML5 site or the MDN Canvas. tutorial.

Performance testing

To address the quickly changing world of HTML5 canvas, JSPerf ( tests verify that every proposed optimization still works. JSPerf is a web application that allows developers to write JavaScript performance tests. Each test focuses on a result that you’re trying to achieve (for example, clearing the canvas), and includes multiple approaches that achieve the same result. JSPerf runs each approach as many times as possible over a short time period and gives a statistically meaningful number of iterations per second. Higher scores are always better! Visitors to a JSPerf performance test page can run the test on their browser, and let JSPerf store the normalized test results on Browserscope ( Because the optimization techniques in this article are backed up by a JSPerf result, you can return to see up-to-date information about whether or not the technique still applies. I’ve written a small helper application that renders these results as graphs, embedded throughout this article.

All of the performance results in this article are keyed on the browser version. This turns out to be a limitation, since we don't know what OS the browser was running on, or even more importantly, whether or not HTML5 canvas was hardware accelerated when the performance test ran. You can find out if Chrome's HTML5 canvas is hardware accelerated by visiting about:gpu in the address bar.

Pre-render to an off-screen canvas

If you’re re-drawing similar primitives to the screen across multiple frames, as is often the case when writing a game, you can make large performance gains by pre-rendering large parts of the scene. Pre-rendering means using a separate off-screen canvas (or canvases) on which to render temporary images, and then rendering the off-screen canvases back onto the visible one. For example, suppose you’re redrawing Mario running at 60 frames a second. You could either redraw his hat, moustache, and “M” at each frame, or pre-render Mario before running the animation. no pre-rendering:

// canvas, context are defined
function render() {


var m_canvas = document.createElement('canvas');
m_canvas.width = 64;
m_canvas.height = 64;
var m_context = m_canvas.getContext('2d');

function render() {
  context.drawImage(m_canvas, 0, 0);

Note the use of requestAnimationFrame, which is discussed in more detail in a later section.

This technique is especially effective when the rendering operation (drawMario in the above example) is expensive. A good example of this is text rendering, which is a very expensive operation.

However, the poor performance of the “pre-rendered loose” test case. When pre-rendering, it’s important to make sure that your temporary canvas fits snugly around the image you are drawing, otherwise the performance gain of off-screen rendering is counterweighted by the performance loss of copying one large canvas onto another (which varies as a function of source target size). A snug canvas in the above test is simply smaller:

can2.width = 100;
can2.height = 40;

Compared to the loose one that yields poorer performance:

can3.width = 300;
can3.height = 100;

Batch canvas calls together

Since drawing is an expensive operation, it’s more efficient to load the drawing state machine with a long set of commands, and then have it dump them all onto the video buffer.

For example, when drawing multiple lines, it's more efficient to create one path with all the lines in it and draw it with a single draw call. In other words, rather than drawing separate lines:

for (var i = 0; i < points.length - 1; i++) {
  var p1 = points[i];
  var p2 = points[i+1];
  context.moveTo(p1.x, p1.y);
  context.lineTo(p2.x, p2.y);

We get better performance from drawing a single polyline:

for (var i = 0; i < points.length - 1; i++) {
  var p1 = points[i];
  var p2 = points[i+1];
  context.moveTo(p1.x, p1.y);
  context.lineTo(p2.x, p2.y);

This applies to the world of HTML5 canvas as well. When drawing a complex path, for example, it’s better to put all of the points into the path, rather than rendering the segments separately (jsperf).

Note, however, that with Canvas, there’s an important exception to this rule: if the primitives involved in drawing the desired object have small bounding boxes (for example, horizontal and vertical lines), it may actually be more efficient to render them separately (jsperf).

Avoid unnecessary canvas state changes

The HTML5 canvas element is implemented on top of a state machine that tracks things like fill and stroke styles, as well as previous points that make up the current path. When trying to optimize graphics performance, it’s tempting to focus solely on the graphics rendering. However, manipulating the state machine can also incur a performance overhead. If you use multiple fill colors to render a scene, for example, it’s cheaper to render by color rather than by placement on the canvas. To render a pinstripe pattern, you could render a stripe, change colors, render the next stripe, etc:

for (var i = 0; i < STRIPES; i++) {
  context.fillStyle = (i % 2 ? COLOR1 : COLOR2);
  context.fillRect(i * GAP, 0, GAP, 480);

Or render all odd stripes and then all even stripes:

context.fillStyle = COLOR1;
for (var i = 0; i < STRIPES/2; i++) {
  context.fillRect((i*2) * GAP, 0, GAP, 480);
context.fillStyle = COLOR2;
for (var i = 0; i < STRIPES/2; i++) {
  context.fillRect((i*2+1) * GAP, 0, GAP, 480);

As expected, the interlaced approach is slower because changing the state machine is expensive.

Render screen differences only, not the whole new state

As one would expect, rendering less on the screen is cheaper than rendering more. If you have only incremental differences between redraws, you can get a significant performance boost by just drawing the difference. In other words, rather than clearing the whole screen before drawing:

context.fillRect(0, 0, canvas.width, canvas.height);

Keep track of the drawn bounding box, and only clear that.

context.fillRect(last.x, last.y, last.width, last.height);

If you are familiar with computer graphics, you might also know this technique as “redraw regions”, where the previously rendered bounding box is saved, and then cleared on each rendering. This technique also applies to pixel-based rendering contexts, as is illustrated by this JavaScript Nintendo emulator talk.

Use multiple layered canvases for complex scenes

As mentioned before, drawing large images is expensive and should be avoided if possible. In addition to using another canvas for rendering off screen, as illustrated in the pre-rendering section, we can also use canvases layered on top of one another. By using transparency in the foreground canvas, we can rely on the GPU to composite the alphas together at render time. You might set this up as follows, with two absolutely positioned canvases one on top of the other.

<canvas id="bg" width="640" height="480" style="position: absolute; z-index: 0">
<canvas id="fg" width="640" height="480" style="position: absolute; z-index: 1">

The advantage over having just one canvas here, is that when we draw or clear the foreground canvas, we don’t ever modify the background. If your game or multimedia app can be split up into a foreground and background, consider rendering these on separate canvases to get a significant performance boost.

You can often take advantage of imperfect human perception and render the background just once or at a slower speed compared to the foreground (which is likely to occupy most of your user’s attention). For example, you can render the foreground every time you render, but render the background only every Nth frame. Also note that this approach generalizes well for any number of composite canvases if your application works better with a this sort of structure.

Avoid shadowBlur

Like many other graphics environments, HTML5 canvas allows developers to blur primitives, but this operation can be very expensive:

context.shadowOffsetX = 5;
context.shadowOffsetY = 5;
context.shadowBlur = 4;
context.shadowColor = 'rgba(255, 0, 0, 0.5)';
context.fillRect(20, 20, 150, 100);

Know various ways to clear the canvas

Since HTML5 canvas is an immediate mode drawing paradigm, the scene needs to be redrawn explicitly at each frame. Because of this, clearing the canvas is a fundamentally important operation for HTML5 canvas apps and games. As mentioned in the Avoid canvas state changes section, clearing the entire canvas is often undesirable, but if you must do it, there are two options: calling context.clearRect(0, 0, width, height) or using a canvas-specific hack to do it: canvas.width = canvas.width;.At the time of writing, clearRect generally outperforms the width reset version, but in some cases using the canvas.width resetting hack is significantly faster in Chrome 14

Be careful with this tip, since it depends heavily on the underlying canvas implementation and is very much subject to change. For more information, see Simon Sarris' article on clearing the canvas.

Avoid floating point coordinates

HTML5 canvas supports sub-pixel rendering, and there’s no way to turn it off. If you draw with coordinates that are not integers, it automatically uses anti-aliasing to try to to smooth out the lines. Here’s the visual effect, taken from this sub-pixel canvas performance article by Seb Lee-Delisle:


If the smoothed sprite is not the effect you seek, it can be much faster to convert your coordinates to integers using Math.floor or Math.round (jsperf):

To convert your floating point coordinates to integers, you can use several clever techniques, the most performant of which involve adding one half to the target number, and then performing bitwise operations on the result to eliminate the fractional part.

// With a bitwise or.
rounded = (0.5 + somenum) | 0;
// A double bitwise not.
rounded = ~~ (0.5 + somenum);
// Finally, a left bitwise shift.
rounded = (0.5 + somenum) << 0;

The full performance breakdown is here (jsperf).

Note that this sort of optimization should no longer matter once canvas implementations are GPU accelerated which will be able to quickly render non-integer coordinates.

Optimize your animations with requestAnimationFrame

The relatively new requestAnimationFrame API is the recommended way of implementing interactive applications in the browser. Rather than command the browser to render at a particular fixed tick rate, you politely ask the browser to call your rendering routine and get called when the browser is available. As a nice side effect, if the page is not in the foreground, the browser is smart enough not to render. The requestAnimationFrame callback aims for a 60 FPS callback rate but doesn’t guarantee it, so you need to keep track of how much time passed since the last render. This can look something like the following:

var x = 100;
var y = 100;
var lastRender =;
function render() {
  var delta = - lastRender;
  x += delta;
  y += delta;
  context.fillRect(x, y, W, H);

Note that this use of requestAnimationFrame applies to canvas as well as other rendering technologies such as WebGL. At the time of writing, this API is only available in Chrome, Safari and Firefox, so you should use this shim.

Most mobile canvas implementations are slow

Let’s talk about mobile. Unfortunately at the time of writing, only iOS 5.0 beta running Safari 5.1 has GPU accelerated mobile canvas implementation. Without GPU acceleration, mobile browsers don’t generally have powerful enough CPUs for modern canvas-based applications. A number of the JSPerf tests described above perform an order of magnitude worse on mobile compared to desktop, greatly restricting the kinds of cross-device apps you can expect to successfully run.


To recap, this article covered a comprehensive set of useful optimization techniques that will help you develop performant HTML5 canvas-based projects. Now that you’ve learned something new here, go forth and optimize your awesome creations. Or, if you don’t currently have a game or application to optimize, check out Chrome Experiments and Creative JS for inspiration.