The CSS Podcast - 008: Sizing Units
The web is a responsive medium, but sometimes you want to control its dimensions to improve the overall interface quality. A good example of this is limiting line lengths to improve readability. How would you do that in a flexible medium like the web?
For this case,
you can use a ch
unit, which is equal to the width of a "0"
character in the rendered font at its computed size.
This unit allows you to limit the width of text with a unit that's designed to size text,
which in turn,
allows predictable control regardless of the size of that text.
The ch
unit is one of a handful of units that are helpful for specific contexts like this example.
Numbers
Numbers are used to define opacity
, line-height
and even for color channel values in rgb
.
Numbers are unitless integers (1, 2, 3, 100) and decimals (.1, .2, .3).
Numbers have meaning depending on their context.
For example, when defining line-height
,
a number is representative of a ratio if you define it without a supporting unit:
p {
font-size: 24px;
line-height: 1.5;
}
In this example, 1.5
is equal to 150% of the p
element's computed pixel font size.
This means that if the p
has a font-size
of 24px
,
the line height will be computed as 36px
.
Numbers can also be used in the following places:
- When setting values for filters:
filter: sepia(0.5)
applies a50%
sepia filter to the element. - When setting opacity:
opacity: 0.5
applies a50%
opacity. - In color channels:
rgb(50, 50, 50)
, where the values 0-255 are acceptable to set a color value. See color lesson. - To transform an element:
transform: scale(1.2)
scales the element by 120% of its initial size.
Percentages
When using a percentage in CSS you need to know how the percentage is calculated.
For example,width
is calculated as a percentage of the available width in the parent element.
div {
width: 300px;
height: 100px;
}
div p {
width: 50%;
}
In the above example, the width of div p
is 150px
, assuming that the layout uses the default box-sizing: content-box
.
If you set margin
or padding
as a percentage,
they will be a portion of the parent element's width,
regardless of direction.
div {
width: 300px;
height: 100px;
}
div p {
margin-top: 50%; /* calculated: 150px */
padding-left: 50%; /* calculated: 150px */
}
In the above snippet, both the margin-top
and padding-left
will compute to 150px
.
div {
width: 300px;
height: 100px;
}
div p {
width: 50%; /* calculated: 150px */
transform: translateX(10%); /* calculated: 15px */
}
If you set a transform
value as a percentage,
it is based on the element with the transform set.
In this example, the p
has a translateX
value of 10%
and a width
of 50%
.
First, calculate what the width will be: 150px
because it is 50% of its parent's width.
Then, take 10%
of 150px
, which is 15px
.
Dimensions and lengths
If you attach a unit to a number, it becomes a dimension.
For example, 1rem
is a dimension.
In this context, the unit that is attached to a number is referred to in specifications as a dimension token.
Lengths are dimensions that refer to distance and they can either be absolute or relative.
Absolute lengths
All absolute lengths resolve against the same base,
making them predictable wherever they're used in your CSS.
For example, if you use cm
to size your element and then print,
it should be accurate if you compared it to a ruler.
div {
width: 10cm;
height: 5cm;
background: black;
}
If you printed this page, the div
would print as a 10x5cm black rectangle.
Keep in mind, CSS is used not only for digital content, but also to style print content.
Absolute lengths can really come in handy when designing for print.
Relative lengths
A relative length is calculated against a base value, much like a percentage.
The difference between these and percentages is that you can contextually size elements.
This means that CSS has units such as ch
that use the text size as a basis,
and vw
which is based on the width of the viewport (your browser window).
Relative lengths are particularly useful on the web due to its responsive nature.
Font-size-relative units
CSS provides helpful units that are relative to the size of elements of rendered typography,
such as the size of the text itself (em
units) or width of the typefaces characters (ch
units).
unit | relative to: |
---|---|
em | Relative to the font size, i.e. 1.5em will be 50% larger than the base computed font size of its parent. (Historically, the height of the capital letter "M"). |
ex | Heuristic to determine whether to use the x-height, a letter "x", or `.5em` in the current computed font size of the element. |
cap | Height of the capital letters in the current computed font size of the element. |
ch | Average character advance of a narrow glyph in the element's font (represented by the "0" glyph). |
ic | Average character advance of a full width glyph in the element's font, as represented by the "水" (CJK water ideograph, U+6C34) glyph. |
rem | Font size of the root element (default is 16px). |
lh | Line height of the element. |
rlh | Line height of the root element. |
Viewport-relative units
You can use the dimensions of the viewport (browser window) as a relative basis. These units portion up the available viewport space.
unit | relative to |
---|---|
vw | 1% of viewport's width. People use this unit to do cool font tricks, like resizing a header font based on the width of the page so as the user resizes, the font will also resize. |
vh | 1% of viewport's height. You can use this to arrange items in a UI, if you have a footer toolbar for example. |
vi | 1% of viewport's size in the root element's inline axis. Axis refers to writing modes. In horizontal writing modes like English, the inline axis is horizontal. In vertical writing modes like some Japanese typefaces, the inline axis runs top to bottom. |
vb | 1% of viewport's size in the root element's block axis. For the block axis, this would be the directionality of the language. LTR languages like English would have a vertical block axis, since English language readers parse the page from top to bottom. A vertical writing mode has a horizontal block axis. |
vmin | 1% of the viewport's smaller dimension. |
vmax | 1% of the viewport's larger dimension. |
div {
width: 10vw;
}
p {
max-width: 60ch;
}
In this example, the div
will be 10% of the viewport's width because 1vw
is 1% of the viewport width.
The p
element has a max-width
of 60ch
which means it can't exceed the width of 60 "0" characters in the calculated font and size.
Miscellaneous units
There are some other units which have been specified to deal with particular types of values.
Angle units
In the color module,
we looked at angle units,
which are helpful for defining degree values,
such as the hue in hsl
.
They are also useful for rotating elements within transform functions.
div {
width: 150px;
height: 150px;
transform: rotate(60deg);
}
Using the deg
angle unit, you can rotate a div
90° on its center axis.
div {
background-image: url('a-low-resolution-image.jpg');
}
@media (-webkit-min-device-pixel-ratio: 2), (min-resolution: 192dpi) {
div {
background-image: url('a-high-resolution-image.jpg');
}
}
Resolution units
In the previous example the value of min-resolution
is 192dpi
.
The dpi
unit stands for dots per inch.
A useful context for this is detecting very high resolution screens,
such as Retina displays in a media query and serving up a higher resolution image.
Check your understanding
Test your knowledge of sizing
Which of the following are valid dimensions?
How are absolute and relative units different?
Viewport units are absolute.